Thermostat replacement Guide2013 Land Rover Discovery

Tools Required

Parts Needed

Basic Procedure Overview

1. 1Drain some coolant
2. 2Locate thermostat housing
3. 3Remove housing bolts
4. 4Remove old thermostat and gasket
5. 5Clean mating surfaces
6. 6Install new thermostat and refill

Frequently Asked Questions

How much does thermostat replacement cost for a 2013 Land Rover Discovery?

DIY thermostat replacement on a 2013 Land Rover Discovery costs approximately $20-80 in parts. A professional shop typically charges $100-280 including labor. By doing it yourself, you save $80–$200+ in labor costs.

How long does thermostat replacement take on a 2013 Land Rover Discovery?

A thermostat replacement on a 2013 Land Rover Discovery typically takes 1-2 hours for a DIY mechanic. Professional shops may be faster due to lifts and pneumatic tools. First-timers should add 30–60 minutes for setup and learning.

Can I do thermostat replacement myself on a 2013 Land Rover Discovery?

Difficulty varies depending on your 2013 Land Rover Discovery's specific configuration. With the right tools and a service manual, most handy owners can complete this in 1-2 hours.

What tools do I need for thermostat replacement on a 2013 Land Rover Discovery?

For thermostat replacement on a 2013 Land Rover Discovery you'll need: Drain pan, Socket set, Scraper, Torque wrench. You'll also need the correct replacement parts: Thermostat, Thermostat gasket, Coolant.

What happens if I delay thermostat replacement on my 2013 Land Rover Discovery?

A stuck thermostat causes your 2013 Land Rover Discovery to overheat (stuck closed) or run too cold (stuck open). Overheating risks serious engine damage; running cold increases fuel consumption and wear.