Water pump replacement Guide2013 GMC Acadia

Tools Required

Parts Needed

Basic Procedure Overview

1. 1Drain cooling system
2. 2Remove serpentine belt
3. 3Remove pump pulley
4. 4Remove pump bolts
5. 5Clean mounting surface
6. 6Install new pump with gasket

Frequently Asked Questions

How much does water pump replacement cost for a 2013 GMC Acadia?

DIY water pump replacement on a 2013 GMC Acadia costs approximately $80-250 in parts. A professional shop typically charges $160-450 including labor. By doing it yourself, you save $80–$200+ in labor costs.

How long does water pump replacement take on a 2013 GMC Acadia?

A water pump replacement on a 2013 GMC Acadia typically takes 2-4 hours for a DIY mechanic. Professional shops may be faster due to lifts and pneumatic tools. First-timers should add 30–60 minutes for setup and learning.

Can I do water pump replacement myself on a 2013 GMC Acadia?

A water pump replacement on a 2013 GMC Acadia is rated Intermediate to Advanced. It's doable for experienced DIYers with a good tool set, but beginners may want professional help. Expect it to take 2-4 hours.

What tools do I need for water pump replacement on a 2013 GMC Acadia?

For water pump replacement on a 2013 GMC Acadia you'll need: Drain pan, Socket set, Pulley puller, Torque wrench, RTV sealant. You'll also need the correct replacement parts: Water pump, Water pump gasket, Coolant, and 1 more item.

What happens if I delay water pump replacement on my 2013 GMC Acadia?

A failing water pump will cause your 2013 GMC Acadia to overheat. Continued driving with a bad water pump can warp the cylinder head or blow the head gasket—repairs that cost $1,500–$3,000+.