DTC P111C-62: Control Module Internal Temperature Sensor/Intake Air Temperature Sensor Signal Compare Failure [03/2023 - ]: Procedure

1. Read the DTCs and record the Freeze Frame Data.

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   P111C-62 and other DTCs are output	A
   P111C-62 is output	B

   HINT: 

   If any DTCs other than P111C-62 are output, troubleshoot those DTCs first.

Result: 

A 

GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [03/2023 - ] 

Result: 

B 

See step  2

Pre-procedure1

• Using the GTS, read the values displayed in the Freeze Frame Data recorded in step 1.

  Powertrain > Engine > DTC (P111C-62) > Freeze Frame Data 

  Tester Display
  Intake Air Temperature
  Ambient Temperature

• Read the value displayed on the GTS.

  Standard

  GTS Display	Specified Condition
  Difference between the Intake Air Temperature and the Ambient Temperature	Within 15°C (27°F)

  HINT: 

  When the engine is cold, the value of the intake air temperature, ECM internal temperature and ambient temperature should be approximately the same.

  Result

  Proceed to
  OK
  NG

Post-procedure1

• None.

Result: 

OK 

REPLACE ECM 

Refer to REMOVAL [03/2023 - ]

Result: 

NG 

REPLACE MASS AIR FLOW METER SUB-ASSEMBLY 

Refer to REMOVAL [12/2022 - ]