Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 84 (AUTOMATIC TRANSMISSION SERVICING)
2004 Oldsmobile Bravada RWD
Section 84 (Automatic Transmission Servicing)
2004 Oldsmobile Bravada RWDSECTION Section 84 (Automatic Transmission Servicing)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 Chevrolet RV Cutaway, and 2002 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Application
- Identification
- Lubrication
- On-Vehicle Repairs
- Adjustments
- Removal & Installation
- Notes
- Accumulator Assembly (4L60-E)
- Accumulator Assembly (4L80-E)
- Auxiliary Oil Cooler
- Control & Shift Solenoids (4L60-E)
- Control Valve Body (4L80-E)
- Extension Housing Rear Oil Seal (4L60-E)
- Extension Housing Rear Oil Seal (4L80-E)
- Filler Tube (4L60-E)
- Filler Tube (4L80-E)
- Forward Servo (4L80-E)
- Oil Cooler Lines
- Park/Neutral Position Switch
- Pressure Regulator
- Reverse Servo (4L80-E)
- Shift Cable
- TCC Solenoid, TCC PWM Solenoid & Wiring Harness (4L60-E)
- TCC Valve & Spring (4L80-E)
- Valve Body & Pressure Switch (4L60-E)
- Vehicle Speed Sensor (4L60-E)
- Vehicle Speed Sensors (4L80-E)
- 2-4 Servo (4L60-E)
- Torque Specifications
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.