SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 71 (AUTOMATIC TRANSAXLE SERVICING)REMOVAL & INSTALLATIONSHIFT CONTROL CABLEINSTALLATION
2004 Oldsmobile Bravada RWD

Shift Control Cable: Installation

2004 Oldsmobile Bravada RWDSECTION Installation
WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cable through the cowl and carpet. Install the cable grommet and the bolts in the cowl. Tighten the grommet bolts to specification. See TORQUE SPECIFICATIONS .
  2. Install the cable (4) at the shift control assembly (3). See Fig 2.
  3. Install shift control cable onto floor shift control. See Fig 3.
  4. Install the cable at the transaxle cable brackets (1). Install the cable at the transaxle selector lever (2). See Fig 2.
  5. Adjust the cable. See SHIFT CONTROL CABLE  under ADJUSTMENTS.
  6. Install the center console. See REMOVAL & INSTALLATION in appropriate SHIFT INTERLOCK SYSTEMS article in AUTOMATIC TRANSMISSIONS.
Fig 1: Identifying Shift Cable Components At Transaxle
G00088329Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.