Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 267 (ENGINE CONTROLS - REMOVAL & INSTALLATION)FUEL SYSTEMSFILLER TUBEINSTALLATION
2004 Oldsmobile Bravada RWD
Filler Tube: Installation
2004 Oldsmobile Bravada RWDSECTION Installation
WARNING: This page is about a different car, the 2003 Pontiac Grand Am and 2003 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
- Install the fuel filler pipe.
- Install the fuel filler pipe attaching screw to the under body. See Figure . Tighten the fuel filler pipe attaching screw to specification. See TORQUE SPECIFICATIONS .
- Install the fuel filler hose.
- Position the fuel filler hose clamp at the fuel tank and fuel fill tube. See Figure . Tighten the fuel tank filler hose clamps to specification. See TORQUE SPECIFICATIONS .
- Lower the vehicle.
- Install the fuel filler pipe retainers to the fuel filler pipe access panel. See Figure .
- Install the fuel filler cap.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.