Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 428 (ENGINE CONTROLS - REMOVAL & INSTALLATION - DIESEL)FUEL SYSTEMSGLOW PLUGINSTALLATION
2004 Oldsmobile Bravada AWD
Glow Plug: Installation
2004 Oldsmobile Bravada AWDSECTION Installation
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the glow plug(s). Install the buss bar and wiring, if equipped. Tighten the plug to specification. See TORQUE SPECIFICATIONS .
- Install the harness to the desired glow plug(s). Install the glow plug nuts to the desired glow plug(s). Tighten the nut to specification. Install the air cleaner outlet duct. See AIR CLEANER OUTLET DUCT under AIR INDUCTION SYSTEMS.
- Install the wheelhouse panel to the appropriate wheelhouse. Install the top clips retaining the harness to the top of the wheelhouse panel. Install the push-in retainers to the wheelhouse panel. Connect the negative battery cables. Tighten battery cable bolts to specification.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.