Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 428 (ENGINE CONTROLS - REMOVAL & INSTALLATION - DIESEL)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||||
|---|---|---|---|---|---|---|
| A/C Compressor Bolts | 37 (50) | |||||
| Accelerator Pedal Nuts | 15 (20) | |||||
| Alternator Mounting Bolts | 37 (50) | |||||
| Automatic Transmission Tube Retaining Nuts | 13 (18) | |||||
| Battery Terminal Bolts | 13 (17) | |||||
| ECT Sensor | 15 (20) | |||||
| EGR-To-EGR Bracket Bolts | 15 (20) | |||||
| EGR-To-EGR Cooling Tube Bolts | 15 (20) | |||||
| EGR-To-Intake Manifold Nuts | 14 (19) | |||||
| EGR-To-Exhaust Pipe Nuts | 15 (20) | |||||
| Exhaust Outlet-To-Turbocharger Bolts/Nuts | 39 (53) | |||||
| Exhaust Pipe Clamp | 30 (40) | |||||
| Exhaust Pipe-To-Exhaust Manifold Bolts | 39 (53) | |||||
| Exhaust Pipe-To-Turbocharger Bolts | 39 (53) | |||||
| Fuel cooler Retainer Nuts (Cab & Chassis) | 30 (40) | |||||
| Fuel Cooler Support Bracket Bolts (Pickup) | 13 (18) | |||||
| Fuel Cooler To Chassis And Crossover Bolts (Pickup) | 13 (18) | |||||
| Fuel Feed Pipe Fittings | 30 (41) | |||||
| Fuel Filter Bracket Bolts | 15 (20) | |||||
| Fuel Filter Bracket-To-Fuel Filter/Heater Element Housing | 15 (20) | |||||
| Fuel Injection Control Module Bolts | 18 (25) | |||||
| Fuel Injection Control Module Fuel Line Bolts | 26 (35) | |||||
| Fuel Injection Pump-to-Adaptor Plate Bolts | 15 (20) | |||||
| Fuel Injection Pump Gear Nut | 52 (70) | |||||
| Fuel Injection Pump Mounting Nuts | 15 (20) | |||||
| Fuel Injector Bracket Bolt | 36 (49) | |||||
| Fuel Junction Block Nuts | 18 (25) | |||||
| Fuel Pump Line Fittings (Cab & Chassis) | 22 (30) | |||||
| Fuel Rail Bolts | 19 (26) | |||||
| Fuel Rail Pressure Sensor | 52 (70) | |||||
| Fuel Rail Temperature Sensor | 16 (22) | |||||
| Fuel Return Pipe-To-Fuel Rail Fitting | 32 (44) | |||||
| Fuel Tank Shield Bolts | 13 (18) | |||||
| Fuel Tank Strap Bolts | 30 (40) | |||||
| Glow Plugs | 13 (18) | |||||
| Glow Plug Controller (Federal) | ||||||
| Retaining Nuts | 31 (42) | |||||
| Relay Terminal Nuts | (1) | |||||
| Glow Plug Relay (California | ||||||
| battery supply cable nut | (1) | |||||
| Relay-To-Bracket Bolt | 15 (20) | |||||
| Hood Hinge Bolt | 18 (25) | |||||
| Intake Air Heater | 37 (50) | |||||
| Intake Air Heater Relay (California) | ||||||
| Battery Cables To Controller Stud Nuts | (1) | |||||
| Controller Bolt Retainers | 15 (20) | |||||
| Relay Assembly Wire Terminals To Controller Stud Nuts | (1) | |||||
| Injection Line Fittings | 32 (44) | |||||
| Junction Block-To-Injection Pump Line Fitting | 30 (40) | |||||
| Main Harness Electrical Connector To Bracket Bolts | 15 (20) | |||||
| Oil Return Pipe Nuts | 15 (20) | |||||
| Turbocharger Bypass Valve | 44 (60) | |||||
| Turbocharger Mounting Bolts | 80 (108) | |||||
| Turbocharger Oil Feed Line Bolts | 25 (34) | |||||
| Turbocharger Oil Return Pipe Bolts | 16 (21) | |||||
| Turbocharger Oil Return Pipe Nuts | 15 (20) | |||||
| Water Outlet Tube Bolts | 15 (20) | |||||
| INCH Lbs. (N.m) | ||||||
| Air Cleaner Assembly Upper Housing Cover Screws | 35 (4.0) | |||||
| Air Cleaner Outlet Duct Clamps | 53 (6.0) | |||||
| Air Intake Pipe Bolts | 89 (10.0) | |||||
| Boost Sensor Bracket Bolt | ||||||
| California | 89 (10.0) | |||||
| Federal | 80 (9.0) | |||||
| Camshaft Position Sensor | 71 (8.0) | |||||
| Crankshaft Position Sensor | 71 (8.0) | |||||
| ECM Electrical Connector Bolts | 71 (8.0) | |||||
| EGR Throttle Valve Solenoid Bolts | 89 (10.0) | |||||
| EGR Valve Solenoid Bolt | 89 (10.0) | |||||
| EGR Valve Vent Solenoid Bolt | 89 (10.0) | |||||
| Exhaust Heat Shield-To-Dash Panel Nuts | 80 (9.0) | |||||
| Exhaust Outlet Heat Shield Bolts | 71 (8.0) | |||||
| Exhaust Pipe Heat Shield Bolts | 71 (8.0) | |||||
| Fuel Feed Pipe Retainer Bolts | 35 (4.0) | |||||
| Fuel Fill And Vent Hose Clamps | 22 (2.5) | |||||
| Fuel Injector Return Line Bolts | 106 (12.0) | |||||
| Fuel Pressure Regulator Screws | (2) | |||||
| Fuel Tank Filler Housing To Body Screws (Pickup) | 20 (2.3) | |||||
| Fuel Tank Filler Housing-To-Fuel Tank Fill Pipe Screws (Pickup) | 20 (2.3) | |||||
| Fuel Tank Ground Strap Bolt (Pickup) | 80 (9.0) | |||||
| Intake Air Heater Wire Nut | 44 (5.0) | |||||
| Intake Air Heater Wire Terminal Nut | 35 (4.0) | |||||
| MAF/IAT Sensor Screws | 71 (8.0) | |||||
| Turbocharger Heat Shield Bolts | 80 (9.0) | |||||
| Upper Fan Shroud Bolts | 80 (9.0) | |||||
| Upper Intake Manifold Tube Nuts | 10 (89) | |||||
| Wiring Harness Bracket To Thermostat Housing Bolt | 71 (8.0) | |||||
|
||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.