Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 36 (AUTOMATIC TRANSAXLE OVERHAUL & TESTING - 4T65-E)
2004 Oldsmobile Bravada AWD
Section 36 (Automatic Transaxle Overhaul & Testing - 4T65-E)
2004 Oldsmobile Bravada AWDSECTION Section 36 (Automatic Transaxle Overhaul & Testing - 4T65-E)
WARNING: This page does not describe the selected car, but rather 43 other vehicles, including the 2003 Pontiac Montana, 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Pontiac Aztek, and 2003 Oldsmobile Silhouette. However, it is still accessible from the selected car via links, so may be relevant.
- Application
- Identification
- Description & Operation
- Lubrication
- Trouble Shooting
- Component Tests
- Transaxle Disassembly
- Torque Converter
- Transfer Case Removal
- Reverse Band Servo
- Forward Band Servo
- Oil Pan & Filter
- Accumulator Assembly & 2-1 Manual Band Servo
- Control Valve Body, Oil Pump & Vehicle Speed Sensor
- Output Shaft
- Front Differential Carrier End Play Check
- Manual Valve Link & Oil Dam
- Case Cover & Gaskets
- 4TH Clutch Shaft & Plates
- Drive & Driven Sprockets
- Driven Sprocket Support Assembly
- Input & 2ND Clutch Assemblies
- Reverse Band & Reaction Drum
- Input Clutch Housing End Play Check
- Case Extension & Differential Carrier
- Input & Reaction Carrier
- Reaction Sun Gear & 2-1 Manual Band
- 1-2 Support Drum & Forward Band
- Final Drive Internal Gear
- Parking System Components
- Component Disassembly & Reassembly
- Case Components
- Drive Sprocket Support
- Parking System Components
- Differential Carrier Internal Gear
- Differential Carrier
- Vehicle Speed Sensor RELUCTOR Wheel
- Case Extension
- Forward Band
- 1-2 Support Roller Clutch
- 2-1 Manual Band
- Reaction Sun Gear & Drum
- Input & Reaction Carrier
- Reverse Reaction Drum
- Input & 3RD Sprag Clutches
- Input Clutch & 3RD Clutch
- Input Clutch Housing Check Ball Valve
- Input Shaft Oil Seal Rings
- Input Clutch Housing & Sprag Clutches
- 2ND Clutch Assembly
- 2ND Clutch Housing Check Ball Valve
- Reverse Band
- Driven Sprocket Support Assembly
- Driven Sprocket Support Bearing
- Input, 2ND, 3RD & Sprag Clutches
- Drive Sprocket & Turbine Shaft
- Drive & Driven Sprocket Components
- 4TH Clutch Components
- Case Cover Components
- Left Axle Shaft Oil Seal
- Output Shaft
- Vehicle Speed Sensor
- Control Valve Body
- Control Valve Body Spacer Plate
- Oil Pump Assembly
- Wiring Harness
- Case Side Cover
- THERMO Element Adjustment
- 2-1 Manual Band Servo
- Accumulator Components
- Oil Pan & Filter
- Forward Band Servo
- Reverse Band Servo
- Transaxle Reassembly
- Torque Specifications
- Transaxle Specifications
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.