Line Pressure

2004 Oldsmobile Bravada AWDSECTION Line Pressure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Line Pressure

Application Specification
Metric English
Line Pressure at Idle 600-700 RPM
  • Reverse (R) Range
647-760 kPa 94-111 psi
  • Drive (D) Range
382-422 kPa 55-61 psi
Line Pressure at Stall Speed 2400-2700 RPM
  • Reverse (R) Range
1520-1755 kPa 220-254 psi
  • Drive (D) Range
713-844 kPa 103-122 psi
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.