SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1293 (ELECTRONIC SUSPENSION SYSTEM - AUTOMATIC LEVEL CONTROL)COMPONENT LOCATORAUTOMATIC LEVEL CONTROL SUSPENSION CONNECTOR END VIEWS
2004 Oldsmobile Bravada AWD

Automatic Level Control Suspension Connector End Views

2004 Oldsmobile Bravada AWDSECTION Automatic Level Control Suspension Connector End Views
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Automatic Level Control Relay Connector End Views

GM535912Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12129716
  • 4-Way F Metri-Pack 280 Series (GRY)
Pin Wire Color Circuit No. Function
30 RED 742 Battery Positive Voltage
85 BRN 541 Ignition 3 Voltage
86 LT BLU 2248 Real Time Damping Compressor Relay Control
87 RED 742 Battery Positive Voltage
Automatic Level Control Compressor Connector End Views

GM479413Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12110751
  • 7-Way F Metri-Pack 280 Series (BLK)
Pin Wire Color Circuit No. Function
A RED 742 Battery Positive Voltage
B DK BLU 2249 Exhaust Solenoid Control
C BLK 407 Low Reference
D TAN 2252 Pressure Sensor Signal
E GRY 416 5 Volt Reference
F ORN 2440 Battery Positive Voltage
G BLK 1450 Ground - All Others
G BLK 1150 Ground - Escalade EXT
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.