Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
86 10... Disassembly of loading ramp frame/disassembly of rail, left/right
Disassembly of license plate mounting plate refer to 86 10... DISASSEMBLY OF LICENSE PLATE
mounting plate.
Disassembly of pull rod refer to 86 10... DISASSEMBLY OF OVERRUNNING EQUIPMENT .
Release screws (1) of loading ramp frame (2) on cross-strut (3).
Installation:
Tightening Torque: refer to 86 10 7AZ . See PLATFORM for specs.
Release screws (1, 2) on left and right sides of loading ramp frame (3).
Installation:
Use new self-locking nuts.
Tightening Torque: refer to 86 10 8AZ . See PLATFORM for specs.
Release screws (1, 2, 3).
Installation:
Use new self-locking nuts.
Tightening Torque: refer to 86 10 9AZ . See PLATFORM for specs.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.