Carpet Replacement

2002 Honda Civic SiSECTION Carpet Replacement
WARNING: This page is about a different car, the 2006 Acura MDX, 2005 Acura MDX, 2004 Acura MDX, and 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

SRS components are located in this area. Review the SRS component locations for the appropriate model:

Also review the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or service.

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to damage, wrinkle or twist the carpet.
  • Be careful not to damage the dashboard or other interior trim pieces.
  1. Remove these items:
  2. Release the retainers (A) and fasteners (B), lift both third row seat cushions (C) up, then pull the carpet (D) from under the center console (E) and both rear side trim panels (F). Remove the carpet.
    Fig 1: Removing Carpet
    G03641644Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the carpet in the reverse order of removal, and note these items:
    • Take care not to damage, wrinkle, or twist the carpet.
    • Make sure the seat harness is routed correctly.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.