SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2002CIVIC SIREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 93 (SEATS)THIRD ROW SEAT REMOVAL/INSTALLATION
2002 Honda Civic Si

Third Row Seat Removal/Installation

2002 Honda Civic SiSECTION Third Row Seat Removal/Installation
WARNING: This page is about a different car, the 2006 Acura MDX, 2005 Acura MDX, 2004 Acura MDX, and 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required 

KTC trim tool set SOJATP2014

NOTE:
  • Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
  • Take care not to scratch the body or tear the seat covers.
  • Put on gloves to protect your hands.
  1. Remove the front mounting bolt covers (A), then remove the front mounting bolts.
    Fig 1: Removing Front Mounting Bolt Covers
    G03641734Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Lift the seat cushion up.
  3. Remove the rear mounting bolts, then remove the third row seat (A) through the tailgate opening.
    Fig 2: Removing Third Row Seat Through Tailgate Opening
    G03641735Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the third row seat in the reverse order of removal.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.