Oil change Guide1966 Toyota Corolla
Complete DIY repair guide with step-by-step instructions. Find exact parts on Amazon for your vehicle.
At a Glance
Time: 20-30 minutes
Cost (parts): $25-80
Difficulty: Easy
Difficulty
Easy
Time
20-30 minutes
Parts Needed
3 items
DIY Savings
$100-400+
1966 Toyota Corolla — What You Need to Know
- →Drain plug is 14mm — smaller than most vehicles. Do NOT use a 17mm socket
- →2003-2008 1ZZ engine: known oil consumption issue. Always check oil level monthly
- →2009-2013 2ZR uses 0W-20 full synthetic — spec is correct, not a misprint
- →Toyota oil filter (04152-YZZA6) is a spin-on type — standard strap wrench works fine
Torque Specs
Drain plug: 27 ft-lbs (14mm — smaller than most vehicles)
Safety Warnings
- •Allow engine to cool before starting
- •Properly dispose of used oil at recycling center
- •Do not overtighten drain plug
Tools Required
Socket wrench set
Oil filter wrench
Drain pan
Funnel
Jack and jack stands
Parts Needed
Engine Oil (2003-2008 1ZZ)5W-30 — 4.4 quarts with filter
Shop on AmazonEngine Oil (2009-2013 2ZR)0W-20 full synthetic — 4.6 quarts
Shop on AmazonOil Filter
Shop on AmazonOEM 04152-YZZA6Fram PH2 / Mobil 1 M1-108A
Basic Procedure Overview
- 1Remove 14mm drain plug and drain oil
- 2Replace with new Toyota crush washer (01298-1A004) or same washer if Toyota plug-type
- 3Remove spin-on oil filter, install new with rubber O-ring lightly oiled
- 4Fill to capacity based on engine year, check dipstick
Frequently Asked Questions
- How much does oil change cost for a 1966 Toyota Corolla?
- DIY oil change on a 1966 Toyota Corolla costs approximately $25-80 in parts. A professional shop typically charges $105-280 including labor. By doing it yourself, you save $80–$200+ in labor costs.
- How long does oil change take on a 1966 Toyota Corolla?
- A oil change on a 1966 Toyota Corolla typically takes 20-30 minutes for a DIY mechanic. Professional shops may be faster due to lifts and pneumatic tools. First-timers should add 30–60 minutes for setup and learning.
- Can I do oil change myself on a 1966 Toyota Corolla?
- Yes, a oil change on a 1966 Toyota Corolla is rated Easy and is a great beginner DIY project. You'll need basic hand tools and about 20-30 minutes.
- What tools do I need for oil change on a 1966 Toyota Corolla?
- For oil change on a 1966 Toyota Corolla you'll need: Socket wrench set, Oil filter wrench, Drain pan, Funnel, Jack and jack stands. You'll also need the correct replacement parts: Engine Oil (2003-2008 1ZZ) (5W-30 — 4.4 quarts with filter), Engine Oil (2009-2013 2ZR) (0W-20 full synthetic — 4.6 quarts), Oil Filter.
- What happens if I delay oil change on my 1966 Toyota Corolla?
- Delaying an oil change on your 1966 Toyota Corolla causes accelerated engine wear, sludge buildup, and reduced fuel economy. Extended neglect can lead to engine seizure and repairs costing $3,000–$7,000+.
100% Free
Get the Full AI-Powered Repair Guide
Exact torque specs, part numbers, and step-by-step instructions tailored to your 1966 Toyota Corolla.
Unlimited AI repair guides for every vehicle. No signup required. Veteran-owned.