Starter replacement Guide1935 Chevrolet Suburban

Tools Required

Parts Needed

Basic Procedure Overview

1. 1Disconnect battery
2. 2Locate starter (usually near transmission)
3. 3Remove electrical connections
4. 4Remove mounting bolts
5. 5Install new starter
6. 6Reconnect wiring and battery

Frequently Asked Questions

How much does starter replacement cost for a 1935 Chevrolet Suburban?

DIY starter replacement on a 1935 Chevrolet Suburban costs approximately $100-300 in parts. A professional shop typically charges $180-500 including labor. By doing it yourself, you save $80–$200+ in labor costs.

How long does starter replacement take on a 1935 Chevrolet Suburban?

A starter replacement on a 1935 Chevrolet Suburban typically takes 1-2 hours for a DIY mechanic. Professional shops may be faster due to lifts and pneumatic tools. First-timers should add 30–60 minutes for setup and learning.

Can I do starter replacement myself on a 1935 Chevrolet Suburban?

A starter replacement on a 1935 Chevrolet Suburban is rated Intermediate. If you have some DIY experience and the right tools, you can do it yourself in about 1-2 hours. First-timers should budget extra time and watch a tutorial first.

What tools do I need for starter replacement on a 1935 Chevrolet Suburban?

For starter replacement on a 1935 Chevrolet Suburban you'll need: Socket wrench set, Extensions, Floor jack, Wire brush. You'll also need the correct replacement parts: Starter motor, Starter bolts (if corroded).

What happens if I delay starter replacement on my 1935 Chevrolet Suburban?

A failing starter means your 1935 Chevrolet Suburban won't start reliably. Continued attempts to start with a bad starter can drain the battery and damage the flywheel ring gear—an expensive transmission-area repair.