Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2013XC60 FWD L6-3.2L VIN 94 B6324S4REPAIR AND DIAGNOSISSTEERING AND SUSPENSIONSTEERINGPOWER STEERINGSTEERING CONTROL MODULETESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESDESCRIPTION OF FROZEN VALUES
2013 Volvo XC60 FWD L6-3.2L VIN 94 B6324S4
Description Of Frozen Values
2013 Volvo XC60 FWD L6-3.2L VIN 94 B6324S4SECTION Description Of Frozen Values
Description of frozen values
Explanation
Frozen values are parameter values that are stored when a diagnostic trouble code (DTC) is stored.
Not all parameters can be read out for all diagnostic trouble codes. The parameter values can only be read if they can provide additional information on the prevailing conditions when the code was generated.
Total mileage, value
Measurement range: 0 - 1.000.000 km.
The value indicates the vehicle's total mileage when the Diagnostic Trouble Code (DTC) was generated.
MECU power supply, value
Measurement range 0 - 63 V.
Normal range: 12.0 - 14.5 V.
The value indicates the supply voltage to the central electronic module (CEM) when the diagnostic trouble code (DTC) was stored.
Outside temperature, value
Measurement range: -40 to +215 °C.
The value indicates the outside temperature when the diagnostic trouble code (DTC) was stored.
Power consumption Pump motor, value
Measurement range: 0 to 127.5 A.
The value indicates the pump motor's actual power consumption when the DTC was stored.
Pump motor speed, value
Measurement range: 0 to 5000 rpm.
The value indicates the pump motor's actual power speed when the DTC was stored.
Temperature in the control module, value
Measurement range: -40 to +215 °C.
The value indicates the temperature in the control module when the DTC was stored.
Power supply, value
Measurement range 0 - 20.4 V.
The value indicates the power supply to the Power Steering Control Module (PSCM) when the DTC was stored.
Vehicle speed, value
Measurement range: 0 to 255 km/h (158 mph).
The value indicates the actual vehicle speed when the DTC was stored.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.