Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2013XC60 FWD L6-3.2L VIN 94 B6324S4REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSKNOCK SENSORSERVICE AND REPAIR
2013 Volvo XC60 FWD L6-3.2L VIN 94 B6324S4
Knock Sensor: Service and Repair
2013 Volvo XC60 FWD L6-3.2L VIN 94 B6324S4SECTION Service and Repair
Operation number: 28402-2
Knock sensor (KS)
Removal
Note! Removal steps in this procedure may contain installation details.
Remove intake manifold Refer to: Induction pipe, B6324S5, TF-80SC AWD, B6324S5, TF-80SC, B6324S4, TF-80SC AWD, B6324S4, TF-80SC Service and Repair
Torque: Knock sensor, 20 Nm
Remove oil cooler engine Refer to: Oil cooler, engine, B6324S5, B6324S4 Service and Repair
Torque: Knock sensor, 20 Nm
Installation
To install, reverse the removal procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.