Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2013XC60 AWD L6-3.2L VIN 95 B6324S5REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKES AND TRACTION CONTROLSYSTEM SPECIFICATIONS
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5
System Specifications
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5SECTION System Specifications
Tightening torque
Torque: Rear brake disc to wheel hub, 35 Nm
Torque: Brake disc front to wheel hub, 35 Nm
Torque: Brake hose to rear brake caliper, 46 Nm
Torque: Brake hose to front brake caliper, 18 Nm
Torque: Mount rear brake caliper, 110 Nm
Torque: Mount front brake caliper, 200 Nm
Torque: Slide rail rear brake caliper, 35 Nm
Torque: Slide rail front brake caliper, 28 Nm
Torque: Nipple bleeding brake system , 10 Nm
Torque: 6 mm diameter brake line, 14 Nm
Torque: 8 mm diameter brake line, 18 Nm
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.