Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2013XC60 AWD L6-3.2L VIN 95 B6324S5REPAIR AND DIAGNOSISSPECIFICATIONSELECTRICAL SPECIFICATIONSCONTROL UNIT, DIFFERENTIAL LOCK
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5
Control Unit, Differential Lock
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5SECTION Control Unit, Differential Lock
Component specification, differential electronic module (DEM)
Electric feed pump
General
Type
The electrical feed pump consists of a PWM controlled electrical motor and an axial piston pump.
characteristic
The resistance between #1 and #2 shall be very high or infinite at + 20 °C.
Other information
None.
Terminal
Checking the electric feed pump
Check 1
Measure the resistance between the feed pump casing and terminal pin #1. The value should be much greater or infinite.
Check 2
Measure the resistance between the feed pump casing and terminal pin #2. The value should be much greater or infinite.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.