Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2013XC60 AWD L6-3.2L VIN 95 B6324S5REPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - ACCESSORIES AND OPTIONAL EQUIPMENTKEYLESS ENTRY MODULETESTING AND INSPECTIONPROGRAMMING AND RELEARNING
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5
Programming and Relearning
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5SECTION Programming and Relearning
Downloading software and replacing the control module
It is possible to download new software to the control module keyless vehicle (KVM). All codes and settings performed in the control module are stored in Volvo's central database and are automatically downloaded to the control module when downloading software.
Replacing the control module
When replacing the control module, the settings from the old module must be programmed into the new one for the system to work. When downloading software into the new control module, all relevant codes and ID numbers for the remote keys are also downloaded.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.