Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2013XC60 AWD L6-3.2L VIN 95 B6324S5REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTRELAYS AND MODULES - POWERTRAIN MANAGEMENTRELAYS AND MODULES - COMPUTERS AND CONTROL SYSTEMSBODY CONTROL MODULETESTING AND INSPECTIONPROGRAMMING AND RELEARNINGDRIVER DOOR MODULE (DDM) / PASSENGER DOOR MODULE (PDM)
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5
Driver Door Module (DDM) / Passenger Door Module (PDM)
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5SECTION Driver Door Module (DDM) / Passenger Door Module (PDM)
Downloading software and replacing the control module
New software can be downloaded into the passenger door module (PDM) and the driver door module (DDM). When ordering software, the hardware and the software in the car is compared to the information in the Volvo central database. If the comparison is OK the software is downloaded to the control module.
If the comparison between the car and Volvo central database is not OK, the database is updated with the car configuration. When this is complete the software is downloaded.
The window positions must be initialized again after replacing the control module. This is so that the new control module stores the closed position of the window. Initialization is carried out using the diagnostic tool.
For further information regarding downloading, see Design and Function, Downloading Software.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.