Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2013XC60 AWD L6-3.2L VIN 95 B6324S5REPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGRELAYS AND MODULES - HVACCONTROL MODULE HVACTESTING AND INSPECTIONPROGRAMMING THE EVAPORATOR, CLIMATE CONTROL MODULE (CCM)
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5
Programming The Evaporator, Climate Control Module (CCM)
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5SECTION Programming The Evaporator, Climate Control Module (CCM)
Programming the evaporator, climate control module (CCM)
Programming
Note! This adjustment must only be carried out on the vehicle if the owner requests it.
The noise from the compressor can be reduced by reducing the level in the evaporator.
In order for this change to be possible on model years up to and including 2008, the latest software must be downloaded to the Climate control module (CCM).
Note! This programming is only possible on vehicles with more than 4 cylinders.
Click the VCT2000 symbol to begin the programming.
Continue - DONE
-------------------------------------------------
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.