Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2013XC60 AWD L6-3.2L VIN 95 B6324S5REPAIR AND DIAGNOSISBODY AND FRAMEFRAMESUBFRAMEFRONT SUBFRAME MOUNTSERVICE AND REPAIRREAR BUSHING SUBFRAME FRONT
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5
Rear Bushing Subframe Front
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5SECTION Rear Bushing Subframe Front
Operation number: 21824-2
Rear bushing subframe front
Removal
Remove the subframe front Refer to: Front subframe, B6304T4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S5, TF-80SC, B6324S4, TF-80SC AWD, B6324S4, TF-80SC Service and Repair
999 7039 Connecting rod M16X360 999 7039 Connecting rod M16X360 999 7445 Drift 999 7445 Drift 999 7444 Socket 999 7444 Socket 999 7054 Adapter incl. 2x MC6C M6X12 999 7054 Adapter incl. 2x MC6C M6X12 951 2923 Hydraulic hole cylinder 951 2923 Hydraulic hole cylinder
Installation
999 7385 Drift 999 7385 Drift 999 7039 Connecting rod M16X360 999 7039 Connecting rod M16X360 999 7304 Cone 999 7304 Cone 999 7306 Counterhold 999 7306 Counterhold 999 7054 Adapter incl. 2x MC6C M6X12 999 7054 Adapter incl. 2x MC6C M6X12 951 2923 Hydraulic hole cylinder 951 2923 Hydraulic hole cylinder
To install, reverse the removal procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.