Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2013XC60 AWD L6-3.2L VIN 95 B6324S5REPAIR AND DIAGNOSISBODY AND FRAMEBODY CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESVEHICLE COMMUNICATION INFORMATION, CENTRAL ELECTRONIC MODULE (CEM)DESCRIPTION OF ACTIVATION
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5
Description Of Activation
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5SECTION Description Of Activation
Description of activation
Exterior lighting
Left low beam, activated
Activates left low beam.
Right low beam, activated
Activates right low beam.
Front left parking lamp, activated
Activates the front left parking lamp
Front right parking lamp, activated
Activates the front right parking lamp
Rear left parking lamp, activated
Activates the rear left parking lamp
Rear right parking lamp, activated
Activates the rear right parking lamp.
Brake lights, activated
Activates the brake lights.
Fuel pump (FP) relay
Fuel pump (FP) relay
Activates the fuel pump relay that powers the fuel pump control module. For vehicles with diesel engines built before 11w20 the relay powers the fuel pump directly.
Automatic start/stop of engine
(only on vehicle with the automatic engine start/stop function).
Secondary Battery Relay
To activate the secondary battery relay, see Automatic start/stop of engine.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.