Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2013XC60 AWD L6-3.2L VIN 95 B6324S5REPAIR AND DIAGNOSISBODY AND FRAMEBODY CONTROL SYSTEMSBODY CONTROL MODULESERVICE AND REPAIRREAR DOOR MODULE (RDM)
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5
Rear Door Module (RDM)
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5SECTION Rear Door Module (RDM)
Operation number: 36638-2
Rear Door Module (RDM)
Removal
Remove panel side door rear Refer to: Panel rear door Panel, Rear Side Door, Replacing
Installation
To install, reverse the removal procedure.
Note! If installing a new rear door module (RDM) the front door module on the same side will require a software update.
Order and download software Programming and Relearning
Order and download software Programming and Relearning
Perform power window motor, initiation Refer to: Door Window Motor Initialization Programming and Relearning
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.