Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2013XC60 AWD L6-3.2L VIN 95 B6324S5REPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTCELLULAR PHONECOMMUNICATIONS CONTROL MODULETESTING AND INSPECTIONPROGRAMMING AND RELEARNINGINTEGRATED AUDIO MODULE (IAM)
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5
Integrated Audio Module (IAM)
2013 Volvo XC60 AWD L6-3.2L VIN 95 B6324S5SECTION Integrated Audio Module (IAM)
Downloading software and replacing the control module
General
Software can be downloaded to the integrated audio module (IAM). When software is ordered, the vehicle' software and hardware is compared to Volvo's central database. If they are compatible, the software is downloaded to the system.
If the comparison between the car and Volvo's central database does not correspond, the database is updated with the vehicle's configuration. When this is complete, new software is downloaded.
It is also possible to save the software on a USB-memory and update the software in Infotainment control module (ICM) via the USB-port. For vehicles equipped with infotainment system Performance or High Performance (5 inch screen) the USB-port is hidden behind a hatch on Infotainment control module (ICM). For vehicles equipped with infotainment system High Performance Multimedia or Premium Sound Multimedia (7 inch screen) the USB-port is located on Integrated Audio Module (IAM)
Replacing the control module
The integrated audio module (IAM) is mounted in the center console. Upon replacement, the control module is removed from the center console.
After replacement of the integrated audio module (IAM), its unique serial number is checked by the infotainment control module (ICM). If the serial number is incorrect, the integrated audio module (IAM) will not work. If the problem remains after software download, try switching the ignition off/on.
Select the MOST network for a total download of software to the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.