Computer/Controls - Cust. Preparation Service SW Upgrade

2011 Volvo S60 T6 AWD L6-3.0L Turbo VIN 90 B6304T4SECTION Computer/Controls - Cust. Preparation Service SW Upgrade
Title Customer Preparation Service SW upgrade

Ref No US20278.6.5 en-GB

Issuer -

Partner 3 US 7510 Volvo Cars North America

Func Group 1700

Func Desc service and maintenance

Status Released

Status Date 2012-01-31

Issue Date 2012-01-31

Reference SMB 17-006, RTJ 23106

Attachment





Vehicle Type





CSC Customer symptom code

DTC Diagnostic Trouble Codes

Text
CSC = Customer symptom code
MOST Media oriented systems transport\

CAN= Controller area network

If using a printed copy of this journal, always check for the latest online version.

Note:
This journal supercedes the previous document dated 2012-01-22 that was closed in error. There are no changes to this TJ from the previous version

DESCRIPTION:

To ensure that all vehicles are delivered to the customer with the latest software, VCNA has decided that the Software Product (SP) numbers below shall be performed as part of the Customer Preparation service.

This software product is unique in that it is total CAN or MOST upgrade which is limited to one confirmed software download per vehicle. It is valid only for vehicles with a structure week past 200801.

SERVICE:

As part of the Customer preparation Service, upgrade CAN and MOST SW using the software products below as appropriate.








Software Product numbers:
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.