Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2010XC90 FWD L6-3.2L VIN 96 B6324S2REPAIR AND DIAGNOSISMAINTENANCEALIGNMENTSPECIFICATIONS
2010 Volvo XC90 FWD L6-3.2L VIN 96 B6324S2
Alignment: Specifications
2010 Volvo XC90 FWD L6-3.2L VIN 96 B6324S2SECTION Specifications
NOTE: This article contains changes called out by Retailer Technical Journal 19674
Adjusting toe angle, a
Adjusting to positive values generates toe-in angle while adjusting to negative values generates toe-out angle.
Note! All published toe values are for total toe measurement (left and right wheels together).
S60/ S80( -06 )/ V70( 01-07 )/ V70XC,XC70( 01-07 )/ XC90
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.