Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2004XC90 AWD L5-2.5L TURBO VIN 59 B5254T2REPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLANTILOCK BRAKES / TRACTION CONTROL SYSTEMSTESTING AND INSPECTIONPINOUT VALUES AND DIAGNOSTIC PARAMETERSSIGNAL SPECIFICATIONSIGNAL SPECIFICATION, BRAKE CONTROL MODULE (BCM) WITH STC/TRACS
2004 Volvo XC90 AWD L5-2.5L Turbo VIN 59 B5254T2
Signal Specification, Brake Control Module (BCM) With STC/TRACS
2004 Volvo XC90 AWD L5-2.5L Turbo VIN 59 B5254T2SECTION Signal Specification, Brake Control Module (BCM) With STC/TRACS
Signal specification, brake control module (BCM) with STC/ TRACS
All values given are between the relevant terminal in column 1 and terminal #A16 or #A47 (ground), unless otherwise indicated in brackets.
Pins 6, 9, 13, 17-31, 35, 38-41 and 44 are not used.
Note! It is important that the breakout box is connected and that the ground connections have been checked before starting to measure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.