Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2004XC90 AWD L5-2.5L TURBO VIN 59 B5254T2REPAIR AND DIAGNOSISBODY AND FRAMESEATSSEAT TEMPERATURE CONTROL MODULESERVICE AND REPAIR
2004 Volvo XC90 AWD L5-2.5L Turbo VIN 59 B5254T2
Seat Temperature Control Module: Service and Repair
2004 Volvo XC90 AWD L5-2.5L Turbo VIN 59 B5254T2SECTION Service and Repair
Control module heater pad, replacing
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.
Removing the heater pad control module
Remove:
- the seat. See Upholstery back rest, replacing Upholstery Backrest, Replacing
- 1 screw
- the connector
- the control module.
Installing the heater pad control module
Install:
- the control module
- the connector
- 1 screw. Tighten
- the seat. See Upholstery back rest, replacing Upholstery Backrest, Replacing.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.