M47

1992 Volvo 740 L4-2320cc 2.3L DOHC B234F (Can)SECTION M47
General:
Gear Ratios Type M47
1st gear 4.030:1
2nd gear 2.160:1
3rd gear 1.370:1
4th gear 1.000:1
5th gear
M47 0.830:1
M47 II 0.820:1
Reverse gear 3.680:1

Clearance:
Between reverse gear and shift fork 0.1-1.0 mm (0.004-0.039 in)

Axial clearance:
Input shaft 0.01-0.20 mm (0.00O-0.008 in)
Layshaft 0.01-0.10 mm (0.000-0.004 in)
Main shaft 0.01-0.20 mm (0.000-0.008 in)
5th synchro hub (M47 only) 0.01-0.20 mm (0.000-0.008 in)





















RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.