O-Rings, Seals And Gaskets

2013 Volkswagen Touareg VR6 LuxSECTION O-Rings, Seals And Gaskets
  • Replace the O-rings.
  • Radial shaft seals.
  • The open side on the shaft seals faces the fluid to be sealed off.

Prior to Installing

Coat the outer circumference lightly with oil. Fill the space between the sealing lips -arrow- halfway with Sealing Grease:G 052 128 A1  .

Fig 1: Identifying Oil Seal Sealing Lips
GWWN32-0001Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

After Installing 

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.