Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Towing Recognition Control Module -J345-, Retrofitting
Retrofitting A Towing Recognition Control Module -J345- Approved By Volkswagen Is Possible, But It Can Pose Problems Due To The Connection With The Vehicle Can Data Bus. The Control Module Must Then Be Coded In "Guided Fault Finding". Refer To Vehicle Diagnostic Tester.
Installation Of Control Module Solutions That Are Available From Third Parties And Are Not Approved By Volkswagen Is Not Recommended. Installing Such Equipment Voids The Warranty. Generally, These Are Connected To The Tail Lamps And Not Integrated Into The Vehicle Electrical System. This Can Result In A Misdiagnosis From The Lamp Monitoring Function Or To Malfunctions. Also, Dimmed Bulbs Such As Combined Brake And Tail Lamps Cannot Be Activated.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.