Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Inspection and Verification
This service information provides step-by-step module configuration procedures. Carry out the PROGRAMMABLE MODULE INSTALLATION (PMI) procedure in this service information when another aticle directs to carry out configuration or when DTCs from the below list are present:
| DTC | Description | Source | Action |
|---|---|---|---|
| B2477 | Module Configuration Failure |
|
CARRY OUT Programmable Module Installation (PMI). REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| B2900 | VIN mismatch |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| P0602 | Powertrain Control Module Programming Error |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| P0605 | Internal Control Module Read Only Memory (ROM) Error |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| P0613:45 | TCM Processor: Program Memory Failure |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| P0613:46 | TCM Processor: Calibration / Parameter Memory Failure |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| P1639 | Vehicle ID Block Corrupted, Not Programmed |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U0300 | Internal Control Module Software Incompatibility |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U0300:00 | Internal Control Module Software Incompatibility: No Sub Type Information |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U0300:05 | Internal Control Module Software Incompatibility: System Programming Failure |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U0300:51 | Internal Control Module Software Incompatibility: Not Programmed |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U0335:00 | Software Incompatibility with Hybrid Battery Pack Sensor Module: No Sub Type Information |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U0336:00 | Software Incompatibility with Restraints Control Module: No Sub Type Information |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U201A:51 | Control Module Main Calibration Data: Not Programmed |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U2050 | No Application Present |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U2051 | No Application Present |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information |
|
CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this service information. |
| U2100:56 | Initial Configuration Not Complete: Invalid / Incompatible Configuration |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U3000:45 | Control Module: Program Memory Failure |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U3000:46 | Control Module: Calibration / Parameter Memory Failure |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U3000:54 | Control Module: Missing Calibration |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
| U3002:62 | Vehicle Identification Number: Signal Compare Failure |
|
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information. |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.