Item Specification Table

2013 Volkswagen Beetle R-Line, 2.0L Eng VIN TSECTION Item Specification Table
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
ITEM SPECIFICATION TABLE

Item Specification Fill Capacity
High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) WSS-M6C62-A or WSSM6C65-A1 590-790 ml (1.24-1.66 pt) a
High Temperature Nickel Anti-Seize Lubricant
XL-2
ESE-M12A4-A -
Metal Brake Parts Cleaner
PM-4-A or PM-4-B (US); CPM-4 (Canada)
- -
a Actual brake fluid capacity will vary depending on vehicle options.


ITEM SPECIFICATION TABLE

Item Specification
Brake disc minimum thickness 23.0 mm (0.905 in)
Brake pad maximum taper wear (in any direction) 3.0 mm (0.118 in)
Brake pad minimum thickness 3.0 mm (0.118 in)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.