SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2013BEETLE R-LINE, 2.0L ENG VIN TREPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 1121 (MODULE CONFIGURATION)DIAGNOSTIC TESTSMODULE CONFIGURATIONPRINCIPLES OF OPERATIONDEFINITION OF TERMSAS-BUILT DATA
2013 Volkswagen Beetle R-Line, 2.0L Eng VIN T

As-Built Data

2013 Volkswagen Beetle R-Line, 2.0L Eng VIN TSECTION As-Built Data
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

As-Built data is a VIN specific module configuration record. During vehicle build, the configuration from all modules is downloaded and stored in the As-Built database. As-Built data will not reflect customer preference items that have been changed from the default state. These items will need to be changed using programmable parameters after the module is configured.

NOTE: It is not necessary to obtain As-Built data unless directed to do so by the scan tool. This data may be accessed from the technician service publication website.

The following chart lists body/chassis module As-Built data addresses:

BODY/CHASSIS MODULE ADDRESSES FOR AS-BUILT ENTRY

Module Name Module Address
ABS module 760
Instrument cluster (IC) 720
Parking aid module (PAM) B2
Restraints control module (RCM) 737
Vehicle security module (VSM) 755

The following chart describes specific module programming information:

MODULE CONFIGURATION AND PARAMETER CHART

Module Name Reprogram/ Flash Capable Requires PMI Requires Adaptive Learning Requires Calibration Available Programmable Parameters
ABS module Yes Yes No No
  • None
ABS module with IVD/RSC Yes No No IVD/RSC initialization
  • None
Instrument cluster (IC) Yes Yes No No
  • Belt-Minder®
  • Battery saver timer (2 or 30 minutes)
Parking aid module (PAM) No Yes No No
  • None
PCM Yes Yes Yes No
  • Speed control
  • Tire size
  • Axle ratio
Restraints control module (RCM) Yes Yes No No
  • Driver seat Belt-Minder®
Vehicle security module (VSM) Yes Yes Tire pressure monitoring system (TPMS) sensor training No
  • Auto locks
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.