Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2013BEETLE R-LINE, 2.0L ENG VIN TREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALBODY ELECTRICALOEM CONNECTOR END VIEWS (HATCHBACK)CONNECTOR END VIEWSACCESS/START AUTHORIZATION CONTROL MODULE CONNECTOR END VIEWS (J518, T32D)
2013 Volkswagen Beetle R-Line, 2.0L Eng VIN T
Access/Start Authorization Control Module Connector End Views (J518, T32d)
2013 Volkswagen Beetle R-Line, 2.0L Eng VIN TSECTION Access/Start Authorization Control Module Connector End Views (J518, T32d)
| Cavity | Function |
|---|---|
| 1 | ... |
| 2 | ... |
| 3 | Power, module |
| 4 | ... |
| 5 | Passenger door touch sensor input |
| 6 | ... |
| 7 | ... |
| 8 | ... |
| 9 | Driver door touch sensor input |
| 10 | Output to Vehicle electrical system control module (J519) |
| 11 | ... |
| 12 | ... |
| 13 | ... |
| 14 | ... |
| 15 | ... |
| 16 | CAN Low |
| 17 | Ground, module |
| 18 | Antenna, interior 2 (+) |
| 19 | Antenna, interior 1 (+) |
| 20 | Antenna, rear bumper (+) |
| 21 | Antenna, passenger door (+) |
| 22 | Antenna, luggage compartment (+) |
| 23 | Antenna, driver door (+) |
| 24 | Antenna, driver door (-) |
| 25 | Antenna, luggage compartment (-) |
| 26 | Antenna, passenger door (-) |
| 27 | Antenna, rear bumper (-) |
| 28 | Antenna, interior 1 (-) |
| 29 | Antenna, interior 2 (-) |
| 30 | Start system button (E378) input |
| 31 | ... |
| 32 | CAN High |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.