Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2013BEETLE R-LINE, 2.0L ENG VIN SREPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 288 (MODULE COMMUNICATIONS NETWORK SYSTEM)DIAGNOSIS AND TESTINGCOMMUNICATIONS NETWORKDIAGNOSTIC TROUBLE CODE (DTC) INDEX
2013 Volkswagen Beetle R-Line, 2.0L Eng VIN S
Diagnostic Trouble Code (DTC) Index
2013 Volkswagen Beetle R-Line, 2.0L Eng VIN SSECTION Diagnostic Trouble Code (DTC) Index
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC TROUBLE CODE CHART
| DTC | Description | Source | Action |
|---|---|---|---|
| U0002 | CAN Communication Bus Performance | Instrument Cluster | REPAIR all other DTCs first. If DTC U0002 is still present, diagnose the communications network. GO to PINPOINT TEST L . |
| U0073 | Control Module Communication BUS Off | ABS Module | REPAIR all other DTCs first. If DTC U0073 is still present, diagnose the communications network. GO to PINPOINT TEST L . |
| U1262 | SCP (J1850) Communication Bus Fault | Instrument Cluster | REPAIR all other DTCs first. If DTC U1262 is still present, diagnose the communications network. Go to PINPOINT TEST N . |
| U1900 | CAN Communication Bus Failure | ABS Module | REPAIR all other DTCs first. CLEAR the DTCs. CYCLE the key OFF then ON and wait 10 seconds. REPEAT the self-test. If DTC U1900 is still present, GO to PINPOINT TEST L . |
| U1900 | CAN Communication Bus Fault-Received Error | Instrument Cluster | REPAIR all other DTCs first. CLEAR the DTCs. CYCLE the key OFF then ON and wait 10 seconds. REPEAT the self-test. If DTC U1900 is still present, GO to PINPOINT TEST L . |
| U2023 | Fault Received From External Node | ABS Module | REPAIR all other DTCs first. If DTC U2023 is still present, diagnose the communications network. GO to PINPOINT TEST L . |
| U2023 | Fault Received From External Node | Instrument Cluster | DISREGARD DTC U2023. REPAIR all other DTCs. CLEAR the DTCs. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.