Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Towing Recognition Control Module -J345-: Notes
General Information
The Towing Recognition Control Module -J345- recognizes "trailer mode" when there is a power decrease of at least 5 W and transmits this information to various control modules via the CAN data bus.
The Vehicle Electrical System Control Module -J519- and the Comfort System Central Control Module -J393- supply the Towing Recognition Control Module -J519- with information via the CAN data bus.
For information on testing control modules, diagnosing malfunctions, malfunction indicators and fault finding. Refer to Towing Recognition Control Module -J345- .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.