Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2013BEETLE BASE, 2D HATCHBACK, 2.5L ENG VIN X, AUTOMATIC TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 376 (MODULE COMMUNICATIONS NETWORK SYSTEM)
2013 Volkswagen Beetle Base, 2D Hatchback, 2.5L Eng VIN X, Automatic Trans
Section 376 (Module Communications Network System)
2013 Volkswagen Beetle Base, 2D Hatchback, 2.5L Eng VIN X, Automatic TransSECTION Section 376 (Module Communications Network System)
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Description And Operation
- Diagnosis And Testing
- Communications Network
- Notes
- Special Tool(s)
- Principles of Operation
- Inspection and Verification
- System Precheck
- Symptom Chart
- Pinpoint Test A: The Powertrain Control Module (PCM) Does Not Respond To The Diagnostic Tool
- Pinpoint Test B: The Restraint Control Module (RCM) Does Not Respond To The Diagnostic Tool
- Pinpoint Test C: The Anti-Lock Brake System (ABS) Module Does Not Respond To The Diagnostic Tool
- Pinpoint Test D: The Four-Wheel Drive (4WD) Control Module Does Not Respond To The Diagnostic Tool
- Pinpoint Test E: The Parking Aid Module Does Not Respond To The Diagnostic Tool
- Pinpoint Test F: No International Standards Organization (ISO) 9141 Communication Network Communication
- Pinpoint Test G: No Medium Speed Controller Area Network (CAN) Communication
- Pinpoint Test H: No High Speed Controller Area Network (CAN) Communication
- Pinpoint Test I: No Module/Network Communication - No Voltage To The Diagnostic Tool
- Communications Network - Hybrid
- Notes
- Special Tool(s)
- Principles of Operation
- Inspection and Verification
- System Precheck
- Symptom Chart
- Pinpoint Test J: The Power Steering Control Module Does Not Respond To The Diagnostic Tool
- Pinpoint Test K: The Transaxle Control Module (TCM) Does Not Respond To The Diagnostic Tool
- Pinpoint Test L: The Anti-Lock Brake System (ABS) Module Does Not Respond To The Diagnostic Tool
- Pinpoint Test M: The Instrument Cluster Does Not Respond To The Diagnostic Tool
- Pinpoint Test N: The Powertrain Control Module (PCM) Does Not Respond To The Diagnostic Tool
- Pinpoint Test O: No Medium Speed Controller Area Network (CAN) Communication
- Pinpoint Test P: No High Speed Controller Area Network (CAN) Communication
- Communications Network
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.