Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSVOLKSWAGEN2013BEETLE BASE, 2D HATCHBACK, 2.5L ENG VIN X, AUTOMATIC TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 1213 (MODULE COMMUNICATIONS NETWORK)DIAGNOSIS AND TESTINGCOMMUNICATIONS NETWORKSYMPTOM TABLE

2013 Volkswagen Beetle Base, 2D Hatchback, 2.5L Eng VIN X, Automatic Trans

Symptom Table

2013 Volkswagen Beetle Base, 2D Hatchback, 2.5L Eng VIN X, Automatic TransSECTION Symptom Table

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

SYMPTOM TABLE

Condition	Possible Sources	Action
The vehicle will not start with the scan tool connected to the Data Link Connector (DLC) and/or multiple malfunction indicators are only on when the scan tool is connected to the DLC.	Wiring, terminals or connectors Scan tool	Go To PINPOINT TEST AF .
The PCM does not respond to the scan tool	Wiring, terminals or connectors PCM	REFER to the INTRODUCTION - GASOLINE MODELS , pinpoint test QA before proceeding to Pinpoint Test A . If pinpoint test QA has been completed, Go To PINPOINT TEST A .
The ABS module does not respond to the scan tool	Fuse Wiring, terminals or connectors ABS module	Go To PINPOINT TEST B .
The Instrument Panel Cluster (IPC) does not respond to the scan tool	Fuse Wiring, terminals or connectors IPC	Go To PINPOINT TEST C .
The Power Steering Control Module (PSCM) does not respond to the scan tool	Fuse Wiring, terminals or connectors PSCM	Go To PINPOINT TEST D .
The Restraints Control Module (RCM) does not respond to the scan tool	Fuse Wiring, terminals or connectors RCM	Go To PINPOINT TEST E .
The Occupant Classification System Module (OCSM) does not respond to the scan tool	Fuse Wiring, terminals or connectors OCSM	Go To PINPOINT TEST F .
The Transmission Control Module (TCM) does not respond to the scan tool	Fuse Wiring, terminals or connectors TCM	Go To PINPOINT TEST G .
The 4X4 control module does not respond to the scan tool	Fuse Wiring, terminals or connectors 4X4 control module	Go To PINPOINT TEST H .
The Headlamp Control Module (HCM) does not respond to the scan tool	Fuse Wiring, terminals or connectors HCM	Go To PINPOINT TEST I .
The Battery Energy Control Module (BECM) does not respond to the scan tool	Fuse Wiring, terminals or connectors BECM	Go To PINPOINT TEST J .
The Air Conditioning Compressor Module (ACCM) does not respond to the scan tool	Fuse Wiring, terminals or connectors ACCM	Go To PINPOINT TEST K .
The DC to DC Converter Control Module (DC/DC) does not respond to the scan tool	Fuse Wiring, terminals or connectors DC/DC	Go To PINPOINT TEST L .
The Audio Control Module (ACM) does not respond to the scan tool	Fuse Wiring, terminals or connectors ACM	Go To PINPOINT TEST M .
The Front Controls Interface Module (FCIM) does not respond to the scan tool	Fuse Wiring, terminals or connectors FCIM	Go To PINPOINT TEST N .
The Front Display Interface Module (FDIM) does not respond to the scan tool	Fuse Wiring, terminals or connectors FDIM	Go To PINPOINT TEST O .
NOTE: Vehicles equipped with a navigation ACM utilize an FDIM , which does not communicate on the network. The Global Positioning System Module (GPSM) does not respond to the scan tool	Fuse Wiring, terminals or connectors GPSM	Go To PINPOINT TEST P .
The Interior Lighting Control Module (ILCM) does not respond to the scan tool	Fuse Wiring, terminals or connectors ILCM	Go To PINPOINT TEST Q .
The Side Obstacle Detection Control Module - Left (SOD-L) does not respond to the scan tool	Fuse Wiring, terminals or connectors SOD-L	Go To PINPOINT TEST R .
The Side Obstacle Detection Control Module - Right (SOD-R) does not respond to the scan tool	Fuse Wiring, terminals or connectors SOD-R	Go To PINPOINT TEST S .
The Parking Aid Module (PAM) does not respond to the scan tool	Fuse Wiring, terminals or connectors PAM	Go To PINPOINT TEST T .
The Smart Junction Box (SJB) does not respond to the scan tool	Fuse Wiring, terminals or connectors SJB	Go To PINPOINT TEST U .
The HVAC module does not respond to the scan tool	Fuse Wiring, terminals or connectors HVAC module	Go To PINPOINT TEST V .
The audio Digital Signal Processing (DSP) module does not respond to the scan tool	Fuse Wiring, terminals or connectors Audio DSP module	Go To PINPOINT TEST W .
The Driver Door Module (DDM) does not respond to the scan tool	Fuse Wiring, terminals or connectors DDM	Go To PINPOINT TEST X .
The Dual Climate Controlled Seat Module (DCSM) does not respond to the scan tool	Fuse Wiring, terminals or connectors DCSM	Go To PINPOINT TEST Y .
The Driver Seat Module (DSM) does not respond to the scan tool	Fuse Wiring, terminals or connectors DSM	Go To PINPOINT TEST Z .
The Accessory Protocol Interface Module (APIM) does not respond to the scan tool	Fuse Wiring, terminals or connectors APIM	Go To PINPOINT TEST AA .
No Medium Speed Controller Area Network (MS-CAN) communication, all modules are not responding	Wiring, terminals or connectors APIM (if equipped) ACM Audio DSP module (if equipped) DDM (if equipped) DSM (if equipped) DCSM (if equipped) FCIM FDIM GPSM (if equipped) HVAC module (if equipped) ILCM (if equipped) IPC (gateway module) PAM (if equipped) SJB SOD-L (if equipped) SOD-R (if equipped)	Go To PINPOINT TEST AB .
Intermittent no Medium Speed Controller Area Network (MS-CAN) communication, one or more modules are not responding during network test	Wiring, terminals or connectors	Go To PINPOINT TEST AC .
No High Speed Controller Area Network (HS-CAN) communication, all modules are not responding	Wiring, terminals or connectors 4X4 control module (if equipped) ABS module APIM (if equipped) ACCM (Hybrid only) BECM (Hybrid only) DC/DC (Hybrid only) HCM (if equipped) IPC (gateway module) OCSM PSCM (if equipped) RCM TCM (if equipped)	Go To PINPOINT TEST AD .
Intermittent no High Speed Controller Area Network (HS-CAN) communication, one or more modules are not responding during network test	Wiring, terminals or connectors	Go To PINPOINT TEST AE .
No power to the scan tool	Fuse Wiring, terminals or connectors Scan tool	Go To PINPOINT TEST AF .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.