Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2013BEETLE (5C1) L5-2.5L (CBTA)REPAIR AND DIAGNOSISBODY AND FRAMEFRAMESUBFRAMEFRONT SUBFRAMESERVICE AND REPAIRTHREAD ON SUBFRAME MOUNTINGCONTENTS OF THREAD REPAIR SET
2013 Volkswagen Beetle (5C1) L5-2.5L (CBTA)
Contents of Thread Repair Set
2013 Volkswagen Beetle (5C1) L5-2.5L (CBTA)SECTION Contents of Thread Repair Set
Contents of Thread Repair Set
1 Spiral drill 12.5 mm diameter
2 Tap M 12 x 1.5
3 Installing spindle
4 Thread insert M 12 x 1.5 x 24 ( (VAS 6058/1) )
5 Peg breaker with magnetic tips
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.