SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2012GOLF R 4MOTION (5K1) L4-2.0L TURBO (CRZA)REPAIR AND DIAGNOSISSTEERING AND SUSPENSIONSTEERINGRELAYS AND MODULES - STEERINGSTEERING COLUMN CONTROL MODULELOCATIONSSTEERING COLUMN ELECTRONIC SYSTEMS CONTROL MODULE -J527- , THROUGH MODEL YEAR 2010
2012 Volkswagen Golf R 4Motion (5K1) L4-2.0L Turbo (CRZA)

Steering Column Electronic Systems Control Module -J527- , through model year 2010

2012 Volkswagen Golf R 4Motion (5K1) L4-2.0L Turbo (CRZA)SECTION Steering Column Electronic Systems Control Module -J527- , through model year 2010






Control modules in front part of vehicle

Steering Column Electronic Systems Control Module -J527- , through model year 2010









Component Location:


Under the steering column, near the steering column switch
-Arrow-


Steering Column Electronic Systems Control Module -J527- , from model year 2010







1 - Steering Column Electronic Systems Control Module -J527-

Component Location:
• near the steering column switch
Pin Connectors:
• -A16-pin connector -T16r-
• -B4-pin connector -T4k-
Pin Arrangements -T16r- -A-:

1 - Positive connection 8 (30a) in the interior wiring harness -B504-

2 - Ground connection 2 (in main wiring harness) -367-

3 - (Comfort system CAN bus low) connection 1 in the main wiring harness -B406-

4 - (Comfort system CAN bus high connection) 1 in the main wiring harness -B397-

5 - Cruise control connection (in main wiring harness) -B441-

6 - Positive connection (50) (in main wiring harness) -B276- Not for KESSY

7 - Terminal S, (Radio Ultra Low)

8 - Not used

9 - Not used

10 - Not used

11 - (Shift lock) connection in the main wiring harness -B454- Not for KESSY

12 - (Powertrain CAN bus low) connection 1 in the main wiring harness -B390-

13 - (Powertrain CAN bus high) connection 6 in the main wiring harness -B388-

14 - Connection 1 (in main wiring harness) -B465- , Kl15 (not for KESSY)

15 - Not used

16 - Not used
Pin Arrangements -T4k- -B-:

1 - Airbag Control Module -J234- +

2 - Airbag Control Module -J234- -

3 - Not used

4 - Not used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.