Adapting Coming Home Time

2012 Volkswagen CC 4Motion (357) V6-3.6L (CNNA)SECTION Adapting Coming Home Time






Adapting Coming Home Time

Coming Home function: Duration of illumination time when leaving the vehicle.

Illumination time of Coming Home function can be set variably between 0 and 120 seconds.

- Connect the Vehicle Diagnostic Tester. Testing and Inspection

- On the Vehicle Diagnostic Tester, select "Guided Fault Finding".

- Using the "GO TO" button, select "Functions/Component selection" and the following menu options in sequence:

Body

Electrical Equipment

01 - On Board Diagnostic (OBD) capable systems

Vehicle electrical system control module

Functions of Vehicle Electrical System Control Module

Adapting Coming Home Time

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.