SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2012CC 4MOTION (357) V6-3.6L (CNNA)REPAIR AND DIAGNOSISSTARTING AND CHARGINGPOWER AND GROUND DISTRIBUTIONRELAYS AND MODULES - POWER AND GROUND DISTRIBUTIONPOWER DISTRIBUTION MODULETESTING AND INSPECTIONCOMPONENT TESTS AND GENERAL DIAGNOSTICSADAPTING LEAVING HOME TIME
2012 Volkswagen CC 4Motion (357) V6-3.6L (CNNA)

Adapting Leaving Home Time

2012 Volkswagen CC 4Motion (357) V6-3.6L (CNNA)SECTION Adapting Leaving Home Time






Adapting Leaving Home Time

Leaving Home function: Illumination time upon entering vehicle.

Illumination time of Leaving Home function can be set variably between 0 and 120 seconds.

- Connect the Vehicle Diagnostic Tester. Testing and Inspection

- On the Vehicle Diagnostic Tester, select "Guided Fault Finding".

- Using the "GO TO" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• Vehicle electrical system control module

• Functions of Vehicle Electrical System Control Module

• Adapting Leaving Home Time

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.