Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2012CC 4MOTION (357) V6-3.6L (CNNA)REPAIR AND DIAGNOSISPOWER AND GROUND DISTRIBUTIONFUSE
2012 Volkswagen CC 4Motion (357) V6-3.6L (CNNA)
Fuse
2012 Volkswagen CC 4Motion (357) V6-3.6L (CNNA)SECTION Fuse
Locations- Overview Of Fuses
- Safety Cutout, Under Left Instrument Panel
- Fuse panel A -SA- on fuse panel on E-Box High, inside the engine compartment on the left side
- Fuse panel B -SB- on E-Box High, engine compartment, on the left side
- Fuse panel B -SB- on E-Box Low, inside the engine compartment, on the left side
- Position Of Fuses On Electronics Box Low, Engine Compartment, Left
- Fuse panel C -SC- , instrument panel, on the driver side
- Fuse assignment on fuse panel C -SC- , instrument panel, on the driver side, from May 2008
- Fuse panel F -SF- ,inside the luggage compartment in the rear on the left side (BLV, BWS)
- Fuse assignment on fuse panel F -SF- , inside the luggage compartment in the rear on the left side (AXZ, BLV, BWS)
- Fuse 2 (30) -S205-
- Fuse panel D -SD- , instrument panel on the front passenger side
- Fuse assignment on fuse panel D -SD- , instrument panel on the front passenger side
Diagrams- Diagram Information and Instructions
- Electrical Diagrams
- Diagram 61/1
- Diagram 61/2 (Tracks 1-14)
- Diagram 61/3 (Tracks 15-28)
- Diagram 61/4 (Tracks 29-42)
- Diagram 61/5 (Tracks 43-56)
- Diagram 61/6 (Tracks 57-70)
- Diagram 61/7 (Tracks 71-84)
- Diagram 61/8 (Tracks 85-98)
- Diagram 61/9 (Tracks 99-112)
- Diagram 61/10 (Tracks 113-126)
- Diagram 61/11 (Tracks 127-140)
- Diagram 61/12 (Tracks 141-154)
- Diagram 61/13 (Tracks 155-168)
- Diagram 61/14 (Tracks 169-182)
- Diagram 61/15 (Tracks 183-196)
- Diagram 61/16 (Tracks 197-210)
- Diagram 61/17 (Tracks 211-224)
- Diagram 61/18 (Tracks 225-238)
- Diagram 61/19 (Tracks 239-252)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.