Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2010GOLF (5K1) L5-2.5L (CBTA)REPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSPOWER WINDOW CONTROL MODULEDESCRIPTION AND OPERATIONDRIVER DOOR CONTROL MODULE (J386)
2010 Volkswagen Golf (5K1) L5-2.5L (CBTA)
Driver Door Control Module (J386)
2010 Volkswagen Golf (5K1) L5-2.5L (CBTA)SECTION Driver Door Control Module (J386)
Driver Door Control Module (J386)
• Driver Door Control Module and Driver Window Regulator Motor (V147) comprise a single component and cannot be replaced individually.
• If Driver Door Control Module or Driver Window Regulator Motor is to be replaced, the work procedure => [ Driver Door Control Module (J386), Coding ] Driver Door Control Module (J386), Coding must then be performed.
• Additional information:
Refer to the Owner's Manual.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.