SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2010GOLF (5K1) L5-2.5L (CBTA)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSINFORMATION BUSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESDATA BUS ON BOARD DIAGNOSTIC INTERFACE, CODING
2010 Volkswagen Golf (5K1) L5-2.5L (CBTA)

Data Bus On Board Diagnostic Interface, Coding

2010 Volkswagen Golf (5K1) L5-2.5L (CBTA)SECTION Data Bus On Board Diagnostic Interface, Coding






Data Bus On Board Diagnostic Interface, Coding

Special tools, testers and auxiliary items required

• Vehicle Diagnostic Tester

This test is used to code the data bus on board diagnostic interface.

- Connect the Vehicle Diagnostic Tester.

- On the Vehicle Diagnostic Tester , select "Guided Fault Finding".

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• Data Bus On Board Diagnostic Interface

• Functions of Data Bus On Board Diagnostic Interface

• Data Bus On Board Diagnostic Interface, Coding

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.