Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2010GOLF (5K1) L5-2.5L (CBTA)REPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYSERVICE AND REPAIRACCESS/START AUTHORIZATION OVERVIEW
2010 Volkswagen Golf (5K1) L5-2.5L (CBTA)
Access/Start Authorization Overview
2010 Volkswagen Golf (5K1) L5-2.5L (CBTA)SECTION Access/Start Authorization Overview
Access/Start Authorization Overview
1 - Antenna Contact Point Coverage Area
2 - Front Passenger Exterior Door Handle
The following components are integrated in front passenger exterior door handle:
• Front passenger exterior door handle touch sensor (G416).
• Right access/start authorization antenna (R135).
Removing and installing passenger-side outside door handle, refer to => [ Passenger Outside Door Handle ] Passenger Outside Door Handle.
• Checking the front passenger access/start authorization antenna (R135) => [ Front Passenger Access/Start Authorization Antenna (R135) ] Front Passenger Access/Start Authorization Antenna (R135).
• Checking the front passenger exterior door handle touch sensor (G416) => [ Front Passenger Outside Door Handle Touch Sensor (G416) ] Front Passenger Outside Door Handle Touch Sensor (G416).
3 - Access/Start Authorization Antenna In Rear Bumper (R136)
• Component location: Behind the rear bumper cover.
• Removing and installing, refer to => [ Access/Start Authorization Antenna In Rear Bumper (R136) ] Access/Start Authorization Antenna In Rear Bumper (R136).
• Checking the access/start authorization antenna in rear bumper (R136) => [ Access/Start Authorization Antenna In Rear Bumper (R136) ] Access/Start Authorization Antenna In Rear Bumper (R136).
4 - Luggage Compartment Access/Start Authorization Antenna (R137)
• Component location: In the center of the luggage compartment in front of the spare wheel well.
• Removing and installing, refer to => [ Luggage Compartment Access/Start Authorization Antenna (R137) ]Luggage Compartment Access/Start Authorization Antenna (R137) .
• Checking the access/start authorization antenna in luggage compartment (R137) => [ Luggage Compartment Access/Start Authorization Antenna (R137) ] Luggage Compartment Access/Start Authorization Antenna (R137).
5 - Driver Side Outside Door Handle
The following components are integrated in driver side outside door handle:
• Driver exterior door handle touch sensor (G415).
• Left access/start authorization antenna (R134).
• Removing and installing driver-side outside door handle, refer to => [ Driver Outside Door Handle ] Driver Outside Door Handle.
• Checking the driver exterior door handle touch sensor (G415) => [ Driver Exterior Door Handle Touch Sensor (G415) ] Driver Exterior Door Handle Touch Sensor (G415).
• Checking the driver access/start authorization antenna (R134) => [ Driver Access/Start Authorization Antenna (R134) ] Driver Access/Start Authorization Antenna (R134).
6 - Interior Access/Start Authorization Antenna 1 (R138)
• Component location: Under the center console in front of the selector lever.
• Removing and installing, refer to => [ Access/Start Authorization Antenna 1 in Vehicle Interior (R138) ] Access/Start Authorization Antenna 1 in Vehicle Interior (R138).
• Checking the access/start authorization antenna 1 in vehicle interior (R138) => [ Interior Access/Start Authorization Antenna 1 (R138) ] Interior Access/Start Authorization Antenna 1 (R138).
7 - Start System Button (E378)
• Removing and installing, refer to => [ Start System Button (E378) ] Service and Repair.
8 - Access/Start Authorization Control Module (J518)
• Component location: inside the driver footwell above the brake pedal.
• Removing and installing, refer to => [ Access/Start Authorization Control Module (J518) ] Description and Operation.
• Coding the access/start authorization control module (J518) => [ Access/Start Authorization Control Module (J518), Coding ] Access/Start Authorization Control Module (J518), Coding.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.